Manhattan - Herringbone on mesh
Manhattan - Herringbone on mesh
Manhattan - Herringbone on mesh

Manhattan - Herringbone on mesh

$169.00

Sold in full box. 40 pcs/box. How much do I need?

The area you need to cover:
Select wastage %: industry standard suggests adding at least 15% overage due to tile cuts, potential breakage, or future repairs.

0

total M² total square feet + recommended overage* required for completion of installation (unless 15% overage declined*)

0

total pcs 5.995 pieces per sq.ft. calculated with clé's recommended grout joint

0

boxes needed 30 pieces per box. all tiles sold by the full box.

Colour and shape variations

C1 S1 (what is this?)

About this range

Semi-glazed linen hued brick facings, Manhattan represents a displays highly desired modern look whilst retaining the traditional texturised surfacing. When light hits the velour surface it creates wonderful depth variation and is often used as a complement to be paired with different textures such as concrete, stone or timber. 

Manhattan displays a high degree of consistency in shape and colour. The semi-glazed surface may be prone to chipping, and therefore is not suitable to high-wear conditions.

Nominal sizes

Pre-meshed flats (stretcher bond, stack bond, or herringbone):

230 x 76 x 12mm 

 

Herringbone:

10 pieces per sheet, 4 sheets per box

Covers 0.82sq per box

 

 **For all custom layout, please contact us directly before ordering.

Suitable usage

Walls, splashbacks (use sealant if appropriate), fireplace surround, exterior wall, hospitality, commercial.

Note

For wet applications, specific waterproofing precautions need to taken such as using a waterproof membrane under the tile and use of a penetrating sealer. Not recommended for areas in constant water contact such as shower walls or a pool.